Qube Containers Limited, which operates on Ipswich docks in the UK, has been fined $40,000 after an employee was run over and dragged by a forklift causing serious injuries to his ankle.
The Health and Safety Executive in the UK(HSE) brought the prosecution following its investigation of the incident involving Harvey Addison, from Ipswich, on 11 December 2023.
Mr Addison was unloading cars from shipping containers at the company’s site in Ipswich. Working with the driver of the forklift truck to empty two small bins, filled with waste packaging, including ratchet straps and chocks, into a larger commercial waste bin.
The two tipping bins had been positioned on a pallet, which was being carried on the forks of the forklift truck.
HSE provides a range of guidance advice regarding lift trucks in the workplace Lift trucks – HSE.
The 21-year-old employee was standing on the pallet and as the forklift truck moved some of the straps fell from the full waste bins, trailing on the floor and getting caught in the wheels of the lift truck. One of these straps got caught on his foot pulling him to the ground and the forklift truck drove over his foot.
Mr Addison remained in hospital for nine days, requiring skin grafts on the outside of his left calf and behind his left thigh just above his knee. He also sustained a broken ankle.
An investigation by HSE identified that Qube Containers Limited failed to provide equipment that was safe and suitable for the task and failed to risk assess the system of work for emptying the bins – which was found to be unsafe.
In addition, the traffic routes were not organised in a safe manner, and it was clear from the work practices on site that vehicles and pedestrians circulated in close proximity.
Qube Containers Limited of Forbes Business Centre, Kempson Way, Bury St Edmunds, Suffolk, UK pleaded guilty to breaching Section 2(1) of the Health and Safety at Work etc Act 1974, UK. They were fined $40,000 and ordered to pay $5,100 approx in costs at Norwich Magistrate’s Court on 12 September 2025.
HSE Inspector Adepeju Sogadgi said: “This injury could easily have been prevented. Employers introducing new processes should make sure they assess the work activity sufficiently and apply effective control measures to minimise the risk. There should be systems in place to ensure safety and the risk should have been considered and documented.”
This HSE prosecution was brought by HSE enforcement lawyer Julian White and paralegal officer Hannah Snelling.
Original Article from UK HSE.
IMEC Technologies provides Safety Management Software to increase worker safety and aid compliance. IMEC’s Safety Management Software will manage inspections and audits, provides hazard identification, incident reporting, management of corrective and preventative actions from generation to closure. IMEC provides lock out tag out software solutions that will allow users to create lockout tagout procedures using an intuitive Mobile App and Manage Lockout Tagout Procedures, also the Review and Execution of those Lockout Tagout Procedures using the Mobile App. Annual Lockout Tagout Procedures audits are conducted using a Mobile App. The Mobile Inspection App allow users to perform inspections and audits, for example the system can be used as a Fire Extinguisher Barcode Inspection Software system to manage monthly fire extinguisher inspections and general fire safety inspections and also to record safety observations and manage corrective actions, anywhere and anytime. The solution can be used as a fire extinguisher barcode inspection software system or life safety inspection system to aid compliance in Higher Education, Healthcare, Industrial and Commercial Organizations. Benefits from a Fire Extinguisher Barcode System include the elimination of paperwork and reducing the burden of compliance with regulations such as NFPA, The Joint Commission. The Incident Reporting App allows users to easily and quickly report incidents, hazards and near-misses, these are then sent to the appropriate people for action and are managed to closure. Web Apps provide features such as, setup, management, scheduling tools, analysis, reporting and dashboards etc with the ability to report incidents to government bodies such as OSHA and RIDDOR. HazMat T&T is a hazardous waste management software solution designed for Environmental Service Companies and companies who generate a large quantity of hazardous waste. The solution tracks hazardous waste from cradle to grave aiding compliance, providing accurate waste inventory, increasing waste handling efficiency, reducing risk and also helps manage waste costs. HazMat T&T Hazardous Waste Management Software can be deployed in a number of deployment scenarios, from Large Hazardous Waste Generators, tracking their hazardous waste at their site to Environmental Service and Waste Management Companies using it track and manage hazardous waste at transfer and disposal sites. For more information visit our website www.imectechnologies.com